热电阻专用高温电缆
High Temperature Cable Special For Thermal Resistance
本产品为热电阻的高温连接线。产品具有优良的耐腐蚀性能，几乎不溶于任何有机溶剂，可耐油、耐酸碱等；具有优良的电绝缘性能，耐高电压，不吸潮，绝缘电阻大；具有阻燃性能。
The cable is a special high temperature connecting wire of thermal resistance. It has many good features such as excellent corrosion resistance, almost insoluble in any organic solvents, oil resistance, acid resistance, better electrical insulating properties, high voltage resistance, moisture resistance, big insulated resistance, flame resistance and so on.
一、产品执行标准 企标
Executive standard: enterprise standard
二、型号
Type
| 型号 Type | 名称 Name |
| AFPXR200 | 热电阻专用高温屏蔽电线 high temperature cable special for thermal resistance |
三、使用特性
operating characteristics
1、交流额定电压：U0/U 300/300V
A.C. rated voltage: U0/U 300/300V
2、工作温度：电缆导体长期工作温度为200℃。
Long term operating temperature of cable conductor is 200℃.
3、导体：多股镀银铜丝。
Cable conductor consists of multi-strand silver plated core wire.
4、弯曲半径：电缆弯曲半径不低于电缆外径的6倍。
Bending radius of cable shall be no less than 6 times that of cable outer diameter.
5、阻燃特性：符合GB19666-2005。
Flame resistant characteristic shall meet the requirements speculated in GB19666-2005 standard.
四、技术性能
Performance parameter
| 项目 Item | 单位 Unit | 技术指标 Technical Indices | |||
| 20℃时导体直流电阻≤ Conductor DC Resistance at 20℃ | Ω/KM | 截面 Cross section | 0.2 | 0.3 | 0.5 |
| 电阻 Resistance | 83.5 | 49.5 | 30.2 | ||
| 试验电压 test voltage | V | 1.5KV，5min不击穿。 Finished cable shall endure 1.5kv voltage test for 5 min without puncture. | |||
| 绝缘电阻 Insulated resistance | MΩ | 500 | |||
五、结构尺寸
External dimension
| 型号 type | 规格 Specifications | 参考外径 Reference diameter |
| AFPXR200 | 1*2*0.2 | 1.2*2.8 |
| AFPXR200 | 1*2*0.3 | 1.3*3.2 |
| AFPXR200 | 1*2*0.5 | 1.6*3.8 |
| AFPXR200 | 1*3*0.2 | 3.1 |
| AFPXR200 | 1*3*0.3 | 3.4 |
| AFPXR200 | 1*3*0.5 | 4.0 |
六、电缆示意图
The figure of cable structure
七、注意事项
Notes
施工时严格防止电缆损伤，降低产品性能。
Cable damage and performance reduction are strictly prevented during installation.
八、交货要求
Delivery requirement
允许根据双方协议长度交货；长度误差不超过±5%。
Delivery length of cable depends on both agreements with length error allowance of ±5%.
